How to Apply our transfers
DTF Heat Press Instructions – HighRez Transfers
Application Steps:
Position Your Substrate
Place your garment or other material flat on the lower platen of your heat press.
Align the Transfer
Position your DTF transfer design-side down (film facing up) in the desired location.
Cover
Cover the transfer with parchment paper or a Teflon sheet.
Press
Use the temperature, time, and pressure settings listed in the guide below.
Peel
Follow the peel method listed for each transfer type (cold, warm, or hot).
Transfer Type |
Temp |
Time |
Pressure |
Peel |
|---|---|---|---|---|
|
Hybrid Transfers |
302–320°F |
8 - 10 seconds |
Medium |
Hot Peel (Warm for small prints) |
|
Glitter DTF Film |
329°F |
10–15 seconds |
Medium–Firm (5kg) |
Cold Peel |
|
Luminous (Glow-in-the-Dark) |
329°F |
10–15 seconds |
Medium–Firm (5kg) |
Cold Peel |
|
Gold / Silver DTF Film |
329°F |
10–15 seconds |
Medium–Firm (5kg) |
Cold Peel |
|
Gold / Silver DTF Foil |
329°F |
10–15 seconds |
Medium–Firm (5kg) |
Cold Peel |
|
Silver Reflective DTF Film |
329°F |
10–15 seconds |
Medium–Firm (5kg) |
Cold Peel |
|
Low Heat DTF Transfers |
268°F |
8 seconds |
Firm (5kg) |
Hot Peel |
|
Colorful Reflective DTF Film |
329°F |
10–15 seconds |
Medium–Firm (5kg) |
Cold Peel |
Perform a **final press** after peeling using **parchment paper** for **5 seconds** to lock in the artwork.
Sublimation and DTF Transfers Printing Instructions
Garments & Substrates
Heat Press Settings – for Sublimation Transfers.
- Temperature: 400°F (204°C)
- Time: 45–60 seconds
- Pressure: Medium to Firm
- Peel: Immediate (hot peel)
- Material: 100% polyester garments or at least 65% polyester blend for vivid results
- Protective Sheet: Use parchment paper or blowout paper on top of the sublimation print
Heat Press Settings – Hard Substrates
- Temperature: 310°F
- Time: 60 seconds (adjust based on substrate thickness)
- Pressure: Light to Medium (firm for metal or ceramic)
- Peel: Varies – most are hot peel but some require cool peel (check substrate instructions)
- Material: Only use polyester-coated blanks (e.g., mugs, tumblers, metal panels, phone cases)
- Taping: Use heat-resistant tape to secure print to substrate
- Protective Sheet: Use parchment or Teflon to protect press surface
Pro Tips & Reminders
- Avoid Peeling too fast without making sure pressure is correct
- Always test print before full production to verify color accuracy
- Keep DTF Prints dry and stored in a cool, dust-free environment
- Double-check your heat press temperature with a surface thermometer
